Share
Specification
| Item | Maintenance Specifications | |
|---|---|---|
| Processes and vehicle types to be inspected | Processes to be introduced | Post-painting process In-line inspection (during conveyor transport) |
| Installation space (reference value) | L:4700mm W:4700mm H:3900mm *Assuming a conveyor width of 2700mm. Varies depending on the customer's production line | |
| Compatible vehicle sizes | Assuming a mini car ~ minivan size vehicle ※Consultation required for size details | |
| Expected vehicle spacing | 2m | |
| Objects to be inspected | Painted body | |
| Inspection Performance | Defect location indication | Mapping the location of defects in vehicle drawings |
| Inspection range | Both sides, top surface (roof, bonnet), rear surface (optional) ※Excluding the end of the character line so on. | |
| Inspection method | Method of Continuous angle of view imaging | |
| Paint condition | Clear paint, medium coat coating ※Gloss level 80 or more | |
| Vehicle Movement Speed and Inspection Tact | Max. 170mm/sec (42 s/car, 85 units/h) ※In the case of a 7m pitch (5m for vehicles + 2m for spacing) | |
| Detection defect size | 0.5 mm or more (NG judgment), 0.3 mm or more (detection) | |
| Detection Result Output | Defect presence, defect location, defect size, time of occurrence, defect type determination result | |
| Hardware / Utilities | Main equipment configuration | Side Inspection Unit 1 and 2 Top Inspection Unit 1 and 2 Control Unit Rear Inspection Unit (optional) Non-contact marking (optional) |
| Capture of vehicle type information | Assuming RFID Switching time: 6 seconds or less ※RFID is arranged by the customer | |
| Power Specifications | 3 phases 380V±10%・50Hz / Single phase 220V±10%・50Hz | |
| Safety Specifications | Safety category 3 ※Consultation required for safety fence arrangement | |
| Maintenance Specifications | Equipped with remote monitoring equipment status and solving problems | |